一.產品用途及性能:(格柵除污機、微濾機、壓濾機) GYZ型刮渣機是運用平流沉淀的一機兩用的設備,將沉淀于池底的泥渣刮集到池子進水端沉渣坑內,以便用抓斗(可另見相關資料)或其它清渣設施(例如閥、泵、螺旋體等)與水體分離,同時將水面浮油等漂浮物刮集到池子的出水端,以供其它的除油設施(如集油管、集油槽、撇油帶)進行除油或撇渣。 GYZ型分重型(比重<2,螺桿提耙)(比重1.2,鋼絲繩提耙)兩種,重型適用于鋼鐵廠的軋鋼及煉鋼連鑄濁環水系統(刮集氧化鐵皮、油等)。輕型廣泛應用于水電站、自來水廠、污水廠、電廠等池底的泥渣綜合比重不大的場合。刮泥功能與桁車式刮泥機類似。 經處理的水若再經過濾等深度處理后可直接作為循環使用。 1. 渣耙、油耙高度可調節,配重后可使刮渣能力加強,對易板結物刮集效果明顯。 2. 采用雙速行走,效率高;并可設定不同的刮集行程,適用范圍廣。 3. 機上設有多種安全保護措施,使用安全可靠。 4. 二種機型供選擇,經濟性能好。 5. 如配套PLC等控制系統,可實現全自動運行。并可遠程集中控制。 6. 可設計成一機多格池形使用。 Product use and performance: GYZ type scraping by consumption of the advection sedimentation slag machine is one of the equipment, and will be in the bottom of the pool water slag scraping the sediment pit, in order to grab (see related material) may be clear or other facilities (such as slag valves, pumps, leptospirosis, etc.) and water separation, and water will blow the floating-debris etc, the pool water for other oil facilities such as tubing, integrating with oil, oil or abandoned). GYZ type points (< 2, the proportion of heavy screw mention rake) (1.2, rope mention raked the proportion of two kinds of, heavy steel rolling and applicable turbidity water system of steelmaking and continuous casting iron oxide (shave sets, oil, etc.). Light is widely applied in hydropower station, the waterworks, sewage treatment plant, etc. The bottom of the mud is comprehensively proportion. Mud scraper function and hoisting type mud scraper machine is similar. If the water depth after processing as the filter can be used directly as the cycle. features 1 slag rake, oil rake height is adjustable and can be made after the balance capacity of wind, slag to harden content scraping set effect is obvious. 2 USES double speed, high efficiency, Can set different scraping set itinerary, wide application scope. On 3 sets of safety protection, safety and reliability. 4. Two models for selection and good economic performance. 5 if matching PLC control system, which can realize full-automatic operation. And the remote control. 6 machine can be designed using multiple pool form. |