應用
（鉆, 銑, 磨, 雕刻）機床 | Applications | Drilling, Milling, Grinding, Engraving | |
外殼夾裝尺寸 | 33 mm | Clamping diameter | 33 mm |
馬達類型 | 3相異步高速電機 | Motor system | 3 Phase asynchronous motor |
轉速范 | 6,000 – 100,000 min-1 | Speed range | 6,000 – 100,000 rpm |
額定電壓 | 60 V | Voltage | 60 V |
電流 | zui大 8 A | Current | max. 8 A |
扭矩 | zui大 8.4 Ncm | Torque | max. 8.4 Ncm |
頻率 | 100 – 1,666 Hz | Frequency | 100 - 1,666 Hz |
功率 | zui大 500 W | Output power | max. 500 W |
重量 | 1.0 kg | Weight | 1.0 kg |
軸承 | 3 x陶瓷軸承, 油脂潤滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
防護等級 | IP 55/57 (加密封氣) | Protection category | IP 55/57 (with sealing air + optional accessory: sealing cap 2001 2618) |
電機保護 | KTY | Motor protection | KTY |
安裝位置 |
| Working position |
|
負載方向 | 徑向 + 軸向 | Load direction | axial + radial |
錐面跳動 | 通常1 µm | Run-out (taper) | typ. 1 µm |
夾持范圍 | 至 Ø 4.0 mm | Chuck clamping range | up to Ø 4.0 mm |
換刀方式 | 壓縮氣 5 - 6 bar (管內經 Ø 4 mm) | Tool change | pneum. 5 - 6 bar (hose Ø 4 mm) |
冷卻系統 | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
防水防塵措施 | 密封氣 27 Nl/min (管內經 Ø 4 mm) | Protected against dirt | Sealing air 27 Nl/min |
外殼材料 | 不銹鋼 | Housing material | Stainless steel |
*變頻器 | e@syDrive® 4310 (IP 00)*, 4425*, 4426, TV 4503*, TV 4506 | Inverter recommendation | e@syDrive® 4310 (IP 00)*, 4425* 4426, TV 4503*, TV 4506 |
特性 | 利用 6 bar 壓縮氣進行錐面清潔 | Highlights | Taper cleaning at 6 bar |
*輸出功率有所降低 | 保留修改權 | *reduced output power | Subject to change without notice |
