RETZ瑞茨『進口緩閉式止回閥』詳細介紹●RETZ水力控制閥系列●RETZ緩閉止回閥●產品數據
?進口緩閉止回閥描述--
RETZ緩閉止回閥有隔膜式和活塞式兩種結構,主要安裝在取水、送水、加壓、潛水污水等泵站的水泵出水管道上,同時兼具止回閥，截止閥,過濾器,調節閥以及水錘消除器的作用。
RETZ shut-off check valve has two types of diaphragm and piston type, which are mainly installed on the water pump water outlet pipe of pumping stations, such as water intake, water delivery, pressurization, diving sewage and so on. It also has the function of check valves, cut-off valves, filters, regulating valves and water hammer eliminators.
?進口緩閉止回閥原理--
1.當水泵開啟時，水通過導管進入中腔，推動活塞上升，主閥開啟。
2.當水泵停止工作時，活塞在回水壓力下降，由于進口處針形閥比出口球閥流量小，因此活塞緩慢下降，主閥也隨之緩慢關閉。
?進口緩閉止回閥特點--
1.將緩開、速閉消除水錘的技術原理一體化，防止開泵水錘和停泵水錘的產生。
2.只需操作水泵電機啟閉按扭，閥門即按照水泵操作規程實現自動開閉。
3.閥體采用了全通道流線型直流式設計，壓力損失小、流量大、具體積小、重量輕
?進口緩閉止回閥參數--
材質:鑄鐵、鑄鋼;
壓力:≤2.5Mpa
口徑:DN50-DN500
緩閉時間：3~60s(可調)
低動作壓力：≥0.04 Mpa
