本機械為直線振動式給料機，具有振動平穩、工作##、壽命長等特點，可為破碎機械連續、均勻喂料，并對物料進料粗篩分，廣泛用于選礦、建材、硅酸鹽和化學工業中的破碎、篩分聯合設備。
根據設備性能要求，配置設計時應盡量減少物料對槽體的壓力，倉料的有效排口不得大于槽寬的四分之一，物料的流動速度控制在6-18m/min.對給料量較大的物料，料倉底部排料處應設置足夠高度的攔礦板；為不影響給料機的性能，攔礦板不得固定在槽體上。為使料倉能順利排出，料倉后壁傾角##設計為55-65度。
This type of linear vibrating feeder is characterized by stable vibration, reliable operation, long service life, etc. It is capable of feeding crushers in an uninterrupted and even way and coarsely sieving materials. Such linear vibrating feeders are widely used in crushing and screening equipment in ore-dressing, building materials, silicate and chemical industry。
Performance requirements based on the equipment, the configuration should be designed to minimize the pressure of the material on the tank, Bunker effective discharge port shall not be greater than one-fourth of the slot width, control the flow rate of the material in the 6-18m/min of feeda large amount of material, at the silo bottom discharge should be set a sufficient height Elam mine board; stopped mine does not affect the performance of the feeder, the board shall be fixed in the tank. Smooth discharge for the silo, silo posterior wall inclination best design of 55-65 degrees.
| 型號規格Model | 進料粒度 Feed size | 處理能力 Capa. | 偏心軸轉速 Speed | 配用動力 Power | 料槽尺寸 Size of Funnel | 外形尺寸 Overrall dimensions | 重量 Weight |
| mm | t/h | r/mm | kw | mm | mm | t | |
| SJZ380×960 | 500 | 96-160 | 500-714 | 11 | 3800×960 | 3882×2177 ×2066 | 4.1 |
| SJZ420×110 | 580 | 120-240 | 500-800 | 15 | 4200×1100 | 4282×2400 ×2150 | 4.7 |
| SJZ490×960 | 500 | 120-240 | 500-800 | 15 | 4900×960 | 4957×2277 ×2150 | 5.4 |
| SJZ490×110 | 630 | 120-280 | 500-800 | 15 | 4900×1100 | 4950×2425 ×2031 | 5.4 |
| SJZ590×110 | 630 | 350 | 750 | 22 | 5900×1100 | 6000×2500 ×2150 | 6.1 |
| SJZ600×130 | 750 | 400-560 | 500-800 | 22 | 6000×1300 | 6082×2580 ×2083 | 7.8 |
