BT200-N00手操器
BT200-N00、BT200-P00
BT200 BRAIN手操器是一種便攜設備,與采用BRAIN通信協議的設備一起使用,對其進行設定、更改、顯示和打印參數(如工位號、輸出模式、范圍等)。這款手操器還可以監視I/O值和自診斷結果,設定恒定電流的輸出以及調零。當系統啟動或維持操作狀態時,只需連接設備的4~20mA DC信號線或ESC(信號調節通信卡)的接口,即可使用BT200。
■FEATURES(產品特點)
● Online monitoring and communication
The modulated communication signal does not interrupt
the 4 to 20 mA DC signals during communication.
● Common to all Yokogawa’s equipment
The Model BT200 BRAIN TERMINAL works with all
equipment that uses BRAIN communication.
● Easy of use
A large display (21 characters by 8 lines) eases setup and
alteration procedures in English prompting interactive
sequences.
● Diagnostics/security with error messages
• Self-check function
• Security code protection of setpoints
• Low battery voltage alarm
• Automatic power-off
● Printer (BT200-P00)
Printer prints out tag numbers and other parameters on the
spot.
● Intrinsic safety (Only for a without printer type)
CSA intrinsically safe approval.
Communication Line:
Line length: Up to 2 km (1.24 mile) (0.75 to 1.25 mm2
instrumentation cable)
Load resistance: 250 to 600 (including cable resistance)
Load capacitance: 0.22 F or less
Load inductance: 3.3 mH or less
Power line spacing: 15 cm (6 inch) or more (Avoid parallel
wiring.)
EMC Conformity Standards ,
EN61326-1 Class A, Table2 (For use in industrial
locations), EN61326-2-3
Display:
LCD dot matrix, 21 characters8 lines
Controls:
Membrane switches (four function keys, 20 general
operation keys, and one power switch)
Printer (BT200-P00):
Thermal paper type
Power Supply:
Five AA 1.5 V dry alkali batteries (LR6/AM3 (N))
For Intrinsic safety type; Five
designated batteries (see OPTIONS)
Dimensions:
BT200-N00 . . . 228x110x51 mm
(9.04.32.0 inch)
BT200-P00 . . . 321x110x61 mm
(12.64.32.4 inch)
Approximate Weight:
BT200-N00 . . . 510 g (1.12 lb)
BT200-P00 . . . 700 g (1.54 lb)
產品選型:
第1項: 打印機 |
| ||||
第2項: 一直是00 |
|