污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
陜西正捷工程科技有限責任公司
參 考 價 | 面議 |
產品型號FMS
品 牌
廠商性質代理商
所 在 地西安市
聯系方式:采購部查看聯系方式
更新時間:2017-09-19 19:08:38瀏覽次數:636次
聯系我時,請告知來自 環保在線DWYER FMS系列流量開關
DWYER FMS系列流量開關詳細信息:
產品名稱: FMS系列流量開關
產品型號: FMS系列
適用于水或油,輸出:PNP常開或PNP常閉
產品介紹:
Series FMS Flow Sensor FMS-1 is for applications requiring RELATIVEmeasurement and set-point of flow rate. This means that the actualvelocity of the flow or the quantitative measurement in GPM is notknown and is not important. What is important is that the set-pointcan be set as a "percentage of" or "relative to" the full flowrate. No other flow sensor could do it this simply oreffectively.
原理:
The model FMS uses a set of flashing LED's to indicate flow. All 7of the LED's will remain lit to show * flow rate. The flow OKlight will also be lit showing that the established full flow rateis what is flowing in the pipe. When you initially set the flowrate, it will mark that as your * mark. If your flow reducesbelow the 50% mark, you will get an alarm from the sensor.
If flow increases beyond the initially established flow rate, the"Overflow" LED light will come on. It is then the operator'sdecisions as to whether to ignore it if too much flow is not aproblem and may actually choose this flow rate to be the new"normal" flow rate. This can be done by just depressing the "set"button until all LED's flash. The FMS has now recalibrated itselfto the new flow rate. The "Flow ok" LED will again light and theset-point will automatically be re-set at the 50% of flowpoint.
DWYER FMS系列流量開關
技術參數:
介質:Water and water based liquids/oil and oil-based liquids.
材質: Sensor Head: 303 SS.
低流量設定: Auto set @ 50% / Adjustable via "set" push button.
設定范圍: 5.0 ft/sec (0-150 cm/sec.)
重復性: < 0.5%.
滯后: 10% of set-point value typical.
介質溫度: -4 to 176°F (-20 to 80°C.)
壓力: 450 psi (30 bar).
響應時間: 25 seconds (typical).
電源: 20-30 VDC (short circuit protected).
電流: < 200 mA.
功耗: 6 W max.
電氣連接: M12 male socket 4pin. Comes with 6.5 ft (2 m) cable with M12connector and pigtail.
過程連接: 1/2" male NPT.
封裝: IP 65 (NEMA 4).
初始操作: After 15 seconds.
輸出: PNP N.O. (switch closed with flow), PNP N.C. (switch open withflow).
重量: .55 lb (.25 kg).
型 號
輸出類型
FMS-1
PNP N.O (常開)
FMS-2
PNP N.C (常閉)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
商鋪:http://szhxt8.com.cn/st130132/
主營產品:Dwyer儀器儀表,UE/CSS 壓力開關,W.E.Anderson閥門,F(xiàn)EMA/WIKA
環保在線 設計制作,未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
請輸入你感興趣的產品
請簡單描述您的需求
請選擇省份
聯系方式
陜西正捷工程科技有限責任公司