上海鉑鱗貿易有限公司
：王昊強
： 
 

 
：whq@berling.com.cn
?

Incremental rotary encoders with analog outputs

For each tooth of the gear wheel, a Sinus and a Cosinus signal are generated. In addition, the device creates of a reference pulse for each revolution of the gear wheel. 

• Signals SIN, COS and Ref. with 1Vss
• High temperature stability of the signal parameters Offset and Amplitude
• Individual signal corrections using adjustment potentiometers possible
• safety integrated
• Optional: serial EEPROM in order to write and read data

Carakterisation

Incremental rotary encoders with digital outputs 

Interpolation electronics are integrated in sensors. Depending on the factor of the interpolation F (for example F=4, 10, 64 or 512), two square wave signals A and B each with F x N (N=numer of teeth of the gear wheel) impulses per revolution are provided.

• Signals A, B and Ref.      RS422, TTL or HTL
• Duty circles A and B       50% +/-10%
• Phase shift A/B              90° +/-45°
   

                   


















 data sheets:   KWG2D    KWG2H    KHG2D    RGM2G-D

 gear wheels:   ZR3-256/Di    ZR5-256/Di

Pulse Sensors 

Measuring principles and characteristics

The magnetic pulse sensors are suited for the contact free detection of gear wheels and gear racks starting from a teeth module value of M=0.75. As measuring scale, slot discs, bolt heads as well as other steel marks can be used for this purpose. The sensors feature high robustness and a wide temperature stability. A high pressure resistance of up to 500 bar (also dynamic) is achieved by use of sealed metal housings.

• Detection of rotating direction is possible
• Type of signal: Open-Collector NPN or PNP, Push-Pull and more
• Voltage supply possible up to 32 VDC
• Output current possible up to 200mA
• Operating temperature -40 up to 125°C (150°C)
• Operating frequency:  seriesHDI     0.010 ... 20kHz
                                      seriesHMX    0 ... 15 kHz
• Sealed, pressure-resistant metallic housing for two canal design starting from a diameter of 10mm and M12x1 respectively
• High resistance against external sources of magnetic disturbance
• High stability to vibrations and shocks

Applications

Measuring of rotation speed and rotation direction for instance in transmission gear boxes, wheel bearings, drive systems and vehicles.

 data sheets:   HDI2    HMX2

Proximity switches

Measuring principles and characteristics 

The magnetic proximity switches represent an alternative to the well known inductive sensors. Using existing magnetic systems within the sensors, steel gear wheels or racks are evaluated without any contact. Non-magnetic elements do not influence the operations. The sensors are characterised by high operation frequencies and a high temperature stability. A high pressure resistance of up to 500 bar (dynamic as well) is achieved by use of sealed metal housings.

• Switching distances up to 8mm - other on request
• Selective identification of ferromagnetic switching marks
• Embedded or non-embedded versions
• Type of signal: Open-Collector NPN or PNP, Push-Pull et al.
• Voltage supply possible up to 32 VDC
• Output current possible up to 200mA
• Operating temperature -40 up to 110°C - other on request
• Operating frequency 0 up to 15 kHz
• Sealed, pressure-resistant metallic housing starting from M12x1
• High stability to vibrations and shocks

Applications

Detection of switching marks in hydraulic systems, drive propulsion systems for vehicles and ships. 

 data sheets:   PHS1

?

VS sensorik

VS sensorik 為*的磁傳感技術界中專家，主要產品有磁式編碼器及磁式傳感器。

磁式編碼器-類比輸出信號

類比輸出信號
Sin/Cos 以1Vpp的差別信號參考標記信號
速度由0到60,000 rpmEEPROM (可選) 用於儲存主要引擎的數據
穩定的信號幅度（可選）RGM2G-類比編碼器資料
配件:
PB-RGMA-USB 校準盒
用來微調編碼器的信號參數 
 

磁式編碼器-數位輸出信號

數位輸出信號
TTL或HTL不同信號 A和B
參考標誌脈衝
速度由0到60.000 rpm
內含增頻電子,可選擇增頻因素
RGM2G-數位編碼器資料

傳感器
傳感器：高耐壓、高精度、溫度穩定。
應用於：建築機械、機床、造船等。
HDI
HMX

DCMU Box(數位校準測量裝置)

?