污水處理設備 污泥處理設備 水處理過濾器 軟化水設備/除鹽設備 純凈水設備 消毒設備|加藥設備 供水/儲水/集水/排水/輔助 水處理膜 過濾器濾芯 水處理濾料 水處理劑 水處理填料 其它水處理設備
恩德斯豪斯（中國）
恩德斯豪斯（中國）
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質0
所 在 地
聯系方式：恩德斯查看聯系方式
更新時間：2022-10-27 12:30:01瀏覽次數：210次
聯系我時，請告知來自 環保在線產品規格參數測量誤差質量流量（液體）：±0
質量流量（液體）：±0.10 %
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.50 %
密度（液體）：±0.0005 g/cm3
0...180 000 kg/h (0...6600 lb/min)
–50...+150 °C (–58...+302 °F)
PN 100，Cl. 600，63K
測量管：9級鈦
連接部件：2級鈦
質量流量（液體）：±0.10 %
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.50 %
密度（液體）：±0.0005 g/cm3
0...180 000 kg/h (0...6600 lb/min)
–50...+150 °C (–58...+302 °F)
PN 100，Cl. 600，63K
測量管：9級鈦
連接部件：2級鈦
科里奧利質量流量
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
Energy‐saving – full-bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Straight, easy-to-clean single-tube system. TMB technology. Measuring tube made of Titanium.
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
DN 8...80 (?...3")
測量管：9級鈦
連接部件：2級鈦
質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度、粘度
質量流量（液體）：±0.10 %
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.50 %
密度（液體）：±0.0005 g/cm3
0...180 000 kg/h (0...6600 lb/min)
PN 100，Cl. 600，63K
–50...+150 °C (–58...+302 °F)
標準：–40...+60 °C (–40...+140 °F)
可選：–50...+60 °C (–58...+140 °F)
1.4301 (304L)，耐腐蝕
傳感器接線盒（標準）：鋁合金AlSi10Mg涂層
傳感器接線盒（可選）：1.4301 (304)、1.4404 (316L)、1.4409 (CF3M)，類同316L
鋁合金AlSi10Mg涂層；1.4409 (CF3M)，類同316L；聚碳酸酯
分體式傳感器（標準）：IP66/67，Type 4X
分體式傳感器（可選）：IP69。分體式變送器：IP66/67, Type 4X
四行背光顯示，觸摸鍵操作（外部操作）
通過現場顯示單元和調試軟件設置
4路輸出：
4...20 mA HART（有源/無源）
4...20 mA WirelessHART
4...20 mA（有源/無源）
脈沖/頻率/開關量輸出（有源/無源）
雙脈沖輸出（有源/無源）
繼電器輸出
狀態輸入
4...20 mA輸入
HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA
24 VDC
100...230 VAC
100...230 VAC / 24 VDC（非危險區）
ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC
CE認證、C-tick認證、EAC認證
功能安全遵循IEC 61508標準，允許在IEC 61511標準規定的安全應用中使用
在認證標定裝置上執行標定（符合ISO/IEC 17025標準）
Heartbeat Technology（心跳技術）符合ISO 9001:2008標準章節7.6 a的溯源校驗要求（TüV認證）
PED、CRN
3.1材料證書
3-A、EHEDG
科里奧利質量流量
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
Energy‐saving – full-bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Straight, easy-to-clean single-tube system. TMB technology. Measuring tube made of Titanium.
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
DN 8...80 (?...3")
測量管：9級鈦
連接部件：2級鈦
質量流量、密度、溫度、體積流量、校正體積流量、參考密度、濃度、粘度
質量流量（液體）：±0.10 %
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.50 %
密度（液體）：±0.0005 g/cm3
0...180 000 kg/h (0...6600 lb/min)
PN 100，Cl. 600，63K
–50...+150 °C (–58...+302 °F)
標準：–40...+60 °C (–40...+140 °F)
可選：–50...+60 °C (–58...+140 °F)
1.4301 (304L)，耐腐蝕性
傳感器接線盒（標準）：鋁合金AlSi10Mg涂層
傳感器接線盒（可選）：1.4301 (304)、1.4404 (316L)、1.4409 (CF3M)，類同316L
鋁合金AlSi10Mg涂層；1.4409 (CF3M)，類同316L；聚碳酸酯
分體式傳感器（標準）：IP66/67，Type 4X
分體式傳感器（可選）：IP69。分體式變送器：IP66/67, Type 4X
四行背光顯示，觸摸鍵操作（外部操作）
通過現場顯示單元和調試軟件設置
4路輸出：
4...20 mA HART（有源/無源）
4...20 mA WirelessHART
4...20 mA（有源/無源）
脈沖/頻率/開關量輸出（有源/無源）
雙脈沖輸出（有源/無源）
繼電器輸出
狀態輸入
4...20 mA輸入
HART、PROFIBUS PA、FOUNDATION Fieldbus、Modbus RS485、Profinet、Ethernet/IP、OPC-UA
24 VDC
100...230 VAC
100...230 VAC / 24 VDC（非危險區）
ATEX、IECEx、cCSAus、NEPSI、INMETRO、EAC
CE認證、C-tick認證、EAC認證
功能安全遵循IEC 61508標準，允許在IEC 61511標準規定的安全應用中使用
在認證標定裝置上執行標定（符合ISO/IEC 17025標準）
Heartbeat Technology（心跳技術）符合ISO 9001:2008標準章節7.6 a的溯源校驗要求（TüV認證）
PED、CRN
3.1材料證書
3-A、EHEDG
科里奧利質量流量
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
Energy‐saving – full-bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Straight, easy-to-clean single-tube system. TMB technology. Measuring tube made of Titanium.
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
科里奧利質量流量
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
Energy‐saving – full-bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Straight, easy-to-clean single-tube system. TMB technology. Measuring tube made of Titanium.
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
DN 8 to 80 (? to 3")
Measuring tube: Titanium grade 9
Connection: Titanium grade 2
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity
Mass flow (liquid): ±0.10 %
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm3
0 to 180 000 kg/h (0 to 6600 lb/min)
PN 100, Class 600, 63K
–50 to +150 °C (–58 to +302 °F)
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
1.4301 (304), corrosion resistant
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
CE, C-tick, EAC marking
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TüV SüD attestation)
PED, CRN
3.1 material
3-A, EHEDG, cGMP
科里奧利質量流量
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os.
Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
Energy‐saving – full-bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space‐saving installation – no in-/outlet run needs.
Straight, easy-to-clean single-tube system. TMB technology. Measuring tube made of Titanium.
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology.
Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. Standard cable between sensor and transmitter.
DN 8 to 80 (? to 3")
Measuring tube: Titanium grade 9
Connection: Titanium grade 2
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity
Mass flow (liquid): ±0.10 %
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm3
0 to 180 000 kg/h (0 to 6600 lb/min)
PN 100, Class 600, 63K
–50 to +150 °C (–58 to +302 °F)
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
1.4301 (304), corrosion resistant
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
Status input
4-20 mA input
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
CE, C-tick, EAC marking
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TüV SüD attestation)
PED, CRN
3.1 material
3-A, EHEDG, cGMP
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
環保在線 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
